What is a mower and what are its advantages over a conventional lawn mower? What is a bar? A mower is used to trim grass and grain. He is from the hobby gardener, as well as used in agriculture and is available in many different sizes and variants. It has a mower similar to a wheelbarrow in the hand, because it has two detached arms. The motor is located on an axis with two well profiled wheels. Learn more at: Bill Hwang. The blade is front transverse mounted, and has many razor-sharp cutting fingers. Because the mower, especially on larger surfaces is used or not anywhere power is available, the decision falls more often on a mower with engine instead of electric motor. In most cases, this engine also propels forward the mower.
There are simpler models with only one forward, or with four forward and three reverse gears. What is a Used mower? A mower is advisable to lawn care with larger Meadows or pastures, because he can cut well and gently even higher and at the same time wet grass. But also in the mountains, slopes or unwegsameren places where the traditional lawn mower won’t reach, the mower is a quite notable alternative. For other opinions and approaches, find out what Park West Asset Management has to say. Using various attachments, the mower can be used also as tiller, Scheeraumer, sweeper or scattering. Filed under: Steph Korey. What advantages does a mower to a conventional lawn mower? Lawn mowers have rotating blades that the grass is cut. The grass gets into this knife is a high tension on the blade of grass, and thus also on the sensitive roots. These can be thereby loosened and damaged. A cut with a mower is similar to the cut with a scythe or sickle.
“The clippings is not only flat set”, but by the blades right in standing up “captures and patient-friendly cut. Another advantage is in the broader area, which the mower due to its structure, can mow at the same time. What is to make sure when buying a bar mower? The bar width and a 100% slope efficiency, depend on as well the desired purpose, as the opportunity to purchase accessories for further uses. A more economical and low-noise motor is certainly recommended. The exchange of the most common wear parts such as air filter and spark plugs should be possible without fuss. This also applies to the blade which must be sharpened again also depending on usage intensity.